■ 제품필수정보

제조사	Megger
제조사품명	1004-735
간략설명	Megger MIT410 2 Insulation Tester, 10V Min, 1000V Max, 200GΩ Max, CAT IV

■ 제품사양

Tester
타입 =
단열재 Tester Minimum Test Voltage = 10V Maximum Test Voltage = 1000V Maximum
단열재 Resistance Measurement = 200GΩ Display
타입 = Analogue, Dual Digital
테스트 전류 = 205mA Battery Life = 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
최소 작동 온도 = -20°C
최대 작동 온도 = +55°C Power Source = Battery Safety Category Level = CAT IV Safety Category Voltage = 600V Safety Category = CAT IV 600V Width = 50mm Megger
단열재 and Continuity TestersThe Megger MIT410/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access.
단열재 testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range is added to allow any intermediate voltage between 50V and 1000 V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges. It supplied with Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline BatteriesFeatures and Benefits
단열재 testing up to 1000V and 200Gohm range Polarisation index, dielectric absorption ratio, variable test voltage and result storage Stabilised insulation test voltage (New) Single range, faster continuity testing between 0.01ohm and 1Mohm (New) 600V TRMS AC and DC voltage measurement Live circuit detection and protection User variable insulation test voltage between 100V and 1000V (New) depending on model Test result storage and Bluetooth® downloading depending on the model Rechargeable options for mains and car charging (New) depending on the modeApplicationsIndustrial sites Cable testing Motor testing Automotive ESD Panel building Avionics Maintenance activitiesCertificationsCAT IV 600V IP54 rated