■ 제품필수정보

제조사	Megger
제조사품명	1006-723
간략설명	Megger MIT400 2 Insulation Tester, 10V Min, 1000V Max, 200GΩ Max, CAT IV

■ 제품사양

Tester
타입 =
단열재 Tester Minimum Test Voltage = 10V Maximum Test Voltage = 1000V Maximum
단열재 Resistance Measurement = 200GΩ Display
타입 = Analogue, Dual Digital
테스트 전류 = 205mA Battery Life = 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
최소 작동 온도 = -20°C
최대 작동 온도 = +55°C Power Source = Battery Safety Category Level = CAT IV Safety Category Voltage = 600V Safety Category = CAT IV 600V Width = 50mm Megger
단열재 and Continuity TestersThe Megger MIT400/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access.
단열재 testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range is added to allow any intermediate voltage between 50V and 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges.Features and BenefitsRugged accelerometer and cableApplicationsIndustrial sites Cable testing Motor testing Automotive ESD Panel building Avionics Maintenance activitiesCertificationsCAT IV 600V IP54 rated