■ 제품필수정보

제조사	TE Connectivity
제조사품명	HPP845E031R5
간략설명	TE Connectivity Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±2%RH, 6 Pins

■ 제품사양

Sensor Function = Temperature & Humidity Output
타입 = Digital Interface
타입 = Serial-I2C Accuracy = ±2%RH
장착형태 = Surface Mount
핀수 = 6
최소 작동 온도 = -40 °C
최대 작동 온도 = +125 °C Minimum Operating Supply Voltage = 1.5 V Maximum Operating Supply Voltage = 3.6 V
패키지 = DFN Length = 3mm
높이 = 0.9mm Width = 3mm
크기 = 3 x 3 x 0.9mm TE Connectivity HTU21D(F)
시리즈 Digital Humidity Sensors with Temperature Output. The HTU21D(F) is a digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format. HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints. Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip ??which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T). With MEAS ??improvements and miniaturization of this sensor, the performance-to-price ratio has been improved ??and eventually, any device should benefit from its cutting edge energy saving operation mode. Full interchangeability with no calibration required in standard conditions Instantaneous desaturation after long periods in saturation phase Compatible with automatized assembly processes, including Pb free and reflow processes Individual marking for compliance to stringent traceability requirements. Applications. Automotive: defogging, HVAC Printers Medical Home Appliance Humidifier