■ 제품필수정보
| 제조사 |
Eaton |
| 제조사품명 |
172810 P3-63/M4/K2-PR |
| 간략설명 |
Eaton 3P Pole Isolator Switch - 63A Maximum Current, 30kW Power Rating, IP65 |
■ 제품사양
Number of Poles = 3P Maximum Current = 63A IP Rating = IP65 Power Rating = 30kW Voltage Rating = 690V Electrical Phase = 3 Accepts Padlocks = Yes Auxiliary Contacts Available = Yes Switch Rating = 63A Length = 100mm Width = 84mm Depth = 340mm Throw Configuration = Single Eaton Non-Fused Switch Disconnectors - P3
시리즈 Isolators With Metal Extension Shafts 30 - 100 A. The P3 series of switch disconnectors with metal extension shafts from Eaton is compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches. With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 100 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences. With the metal extension shaft, the P3 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application. Performs local isolation, manual override ; safety switch functions Rated uninterrupted current from 30 - 100 A Shaft is metal to increase robustness and durability P3
시리즈 fit a standard front plate of 84 x 84 mm. What is the difference between a fused switch disconnector and a non-fused switch disconnector?. Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
