■ 제품필수정보

제조사	Teledyne LeCroy
제조사품명	ZD200
간략설명	Teledyne LeCroy ZD Series ZD200 Oscilloscope Probe, Active, Differential Type, 200MHz, 1:1, 60V Max

■ 제품사양

Probe
타입 = Active, Differential Attenuation = 1:1 Bandwidth = 200MHz Maximum Common Mode Input Voltage = 60V Model Number p = ZD200
시리즈 = ZD Rise Time = 1.75ns Teledyne LeCroy oscilloscope probesThe Teledyne LeCroy oscilloscope probe offers a wide dynamic range of ±20V and a common-mode range of ±60V to allow a broad application use. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required. Differential probes measure the difference in voltage of a test point with another test point. Supplied with: Adapted probe leads and tips Instruction manual Certificate of calibration Supplied with: Y lead set 6x straight tip 2x hook clip 2x micro IC clips 2x Micrograbber 2x extension lead (5cm) 2x extension lead (10cm) 2x dual-pin set (12.8mm) 2x dual-pin set (16.8mm) Instruction manual Certificate of calibrationFeatures and BenefitsBandwidth is DC to 200MHz Attenuation ratio is 1:1 Input impedance is 1Mohmll 3.5pF Input differential range ±20V Common Mode Range is ±60V CMRR (typical) is 80dB at 60Hz and 50dB at 10MHz It provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads Complete accessory kit consisting of 3 seta of grabbers, one alligator clip, 2 sets of leads and 2 tip option for probing a variety of test points Risetime 10??0% (Typical): 1.75nsApplicationsAutomotive development Failure analysis