■ 제품필수정보

제조사	ETA
제조사품명	X222.611.34 BUSBAR (34.5MM) (P
간략설명	ETA Busbar, 24V dc

■ 제품사양

Rated Operational Voltage = 24V dc
시리즈 = X222.611 For Use With = ESX10-T UL, CSA. ESX10-T Electronic Circuit Protectors. Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit. Selective load protection, electronic trip characteristics Reliable overload disconnection with 1.1 x l ;sub>N ;/sub> plus, even with long load lines or small cable cross sections Manual ON/OFF button (S1) Status and failure indication through LED, status output SF or Si contact F Integral fail-safe element adjusted to current rating Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges