■ 제품필수정보

제조사	FTDI Chip
제조사품명	FT-MOD-4232HUB
간략설명	FTDI Chip FT-MOD-4232HUB, USB Serial Hub Module, 480Mbps, USB 2.0, 5 V, 36-Pin

■ 제품사양

Number of Transceivers = 1 Data Rate = 480Mbps Protocols Supported = USB 2.0 Power Supply
타입 = Single Typical Single Supply Voltage = 5 V
장착형태 = Through Hole
핀수 = 36
크기 = 75.04 x 23.37 x 19.9mm
높이 = 19.9mm Length = 75.04mm Width = 23.37mm USB Hi-Speed Serial/Hub Module. Designed to connect to FTDI ??s V2DIPx modules, as well as any USB Host interface (e.g. PC) to expand the number of interfaces that can be accessed downstream from a Host USB 2.0 Hi-Speed compatible One standard
타입 A USB header to connect to the Host USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports USB hub controller and FT4232H are USB bus powered ??no external power supply needed External power input pin available to supply external downstream USB ports Support for USB suspend and resume 4 Asynchronous serial interfaces available which include 2 independent MPSSE engines Defaults to 4 RS-232 interfaces Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I²C One dual-port USB A socket and 0.1 inch pitch header to support up to 3 downstream USB ports Green/Amber status LED for downstream USB port 2 ;3 LED indicating power supply to external downstream USB ports Onboard EEPROM 93LC56 for FT4232H configuration UHCI / OHCI / EHCI host controller compatible