■ 제품필수정보

제조사	RS PRO
제조사품명	DC10W12LS
간략설명	RS PRO LED Driver, 12V Output, 10W Output, 820mA Output, Constant Voltage

■ 제품사양

Output Voltage = 12V Maximum Output Power = 10W Output Current = 820mA Input Voltage = 220 ??240 V ac Operation = Constant Voltage LED Driver
타입 = LED Driver AC or DC Input Voltage = ac Output = DC
Current 등급 = 820mA Voltage Rating = 230 V, 230 V ac It is strongly recommended that these LED lamps are operated with the dedicated LED driver. In some instances the lamps will run with existing drivers and power supplies, but it is important to ensure that the required minimum wattage is reached. Use with the dedicated LED driver is recommended for greatest longevity and compatibility. The 5W lamps will protrude from most fittings and are therefore unsuitable for enclosed fittings. Lamp life may be reduced if installed in sealed fittings. LED Replacement for 12V Dichroic Lamps. Suitable as a direct energy saving alternative to 12V MR16 halogen dichroic lamps Comparable light output to higher wattage halogen lamps making them suitable for general lighting, lift cars, hotels and bars as well as accent and highlighting effects Wide beam angle (60°) for a good even spread of light Long lamp life with very few early failures (if run on the dedicated transformer) making it suitable for difficult to reach locations Available colour outputs: pure white to blend in with other halogen lamps or warm white which provides an eye-pleasing light quality similar to tungsten incandescent lamps Very cool beam and low heat generation reduces air conditioning requirements Attractive nickel plated diecast housing Dedicated LED driver (Stock Number < 669-7206') 669-7206 is suitable for use within a luminaire, enclosure or free standing (within ceiling space etc.) and can drive multiple lamps (max. 10 W)