■ 제품필수정보

제조사	Fluke
제조사품명	I30S
간략설명	Fluke I30S Current Clamp, AC/DC Adapter, 30 A Max, 20A Max, BNC

■ 제품사양

Adapter
타입 = AC/DC Maximum DC Current = 20A Maximum AC Current = 30 A Best Accuracy = ±1% + 2 mA Maximum Conductor Size = 19mm Safety Category = CAT III 300V Connector
타입 = BNC Maximum Bandwidth = 100kHz Battery Life = 30 h Cable Length Extended = 2m
최대 작동 온도 = +50°C
최소 작동 온도 = 0°C Safety Category Voltage = 300V Fluke AC/DC Current ClampThe Fluke i30s AC/DC current clamp has a current range of 30A. It is a new age device used with oscilloscopes and DMMs for accurate, non-intrusive measurement and complex waveform currents. Inclusions: Alkaline PP3 battery, 4mm shrouded plug adaptor, and an operator??s manual Warning Use of the probe on uninsulated conductors is limited to 300VAC RMS or DC and frequencies below 1kHz.Features and BenefitsPower LED warns of low battery by flashing Zero adjust knob to accommodate offsets The wide, flat frequency response means this probe exhibits a fast response when measuring current pulses 2.0m flying lead terminated with 50ohm BNC plugs Withstands overloads to 500A Operating temperature ranges between 0°C and 50°CApplicationsInverters Switch mode power supplies industrial controllers Automotive leakage currents Applications requiring accurate isolated current measurement Waveform analysis ??CertificationsCAT III 300V IEC 61010-1 Pollution degree 2 IEC 61010-2-032 IEC 61326-1 CE certified cCSAus certified EN61010-1 EN61010-2-032