■ 제품필수정보

제조사	Phoenix Contact
제조사품명	2866763
간략설명	Phoenix Contact QUINT-PS/1AC/24DC/10 Switch Mode DIN Rail Power Supply, 85 ??264V ac ac Input, 24V dc dc Output,

■ 제품사양

AC or DC Input Voltage = ac AC or DC Output Voltage = dc Input Voltage = 85 ??264V ac Output Voltage = 24V dc Output Current = 10A Power Rating = 240W Number of Outputs = 1 Electrical Phase = 1
타입 = Switch Mode
높이 = 130mm
장착형태 = DIN Rail Mount Minimum Temperature = -25°C UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS. 665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology. QUINT POWER Single and Three Phase Power Supplies. QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation. Features and benefits:. Selective Fusebreaking Technology (CRC Technology) Worldwide use through wide-range input for DC and AC networks Reliable start difficult loads with static power reserve POWER BOOST High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac Preventive function monitoring DC-OK by professional signaling Slim design Conformal coating for extreme environments (Some models). How do I wire a DIN rail power supply?. The QUINTPOWER power supply unit's feature terminal blocks on both the top ; bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions. What are DIN-rail power supplies used for?. Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.