상품이미지
  •  상품이미지

MPN : 430005

CK Hand Crimping Tool for Terminal
  • 브랜드

    CK

  • 무원상품코드

    M011734010098

  • 타입별
    EA
  • 주문가능수량

    9

  • 최소주문수량1
  • 판매단위1
  • 제품정보
  • 배송정보
    (영업일 기준)
  • 특이사항
구매수량 :

*대량구매해택
  • 수량단가1 : 1개 ~ 56,043원

  • 수량단가2 : 5개 ~ 50,445원


총금액
(VAT 별도)
  • 상품정보
  • 상품후기
  • 상품문의
  • 배송/AS안내

■ 제품필수정보

제조사 CK
제조사품명 430005
간략설명 CK Hand Crimping Tool for Terminal

■ 제품사양

Crimp Connector
타입 = Terminal Ratcheting = No Crimp tool for terminals and ends. C.K Crimping Pliers are high-quality have been designed for professionals and serious DIY enthusiast. They are suitable for crimping bootlace ferrules. A frame made from hardened and tempered high alloy carbon steel, offer a long life and hassle-free operation. Pliers are matt chrome plated to ensure an increased corrosion protection. Especially shaped handles guarantee an anti-slip, safe and comfortable grip. Features and Benefits: A highly durable hand tool designed for professional use Frame made from hardened and tempered high alloy carbon steel for improved durability and long life operation Contoured grips with anti-slip horns for safety and comfortable operation Anti-corrosion protected Capacity: 0,25-2,5 mm² / AWG 23-13 Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ's: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. Crimp tool for terminals and ends. Made from chrome-plated forged steel with a plastic handle. Two models are available.

순번
분류
제목
작성자
날짜
데이터 없음 ...
순번
답변 상태
제목
작성자
날짜
1
신청 접수
2024-11-01
2
신청 접수
2024-10-31
3
답변 완료
2024-10-24
4
신청 접수
2024-10-21
5
신청 접수
2024-05-27
7
답변 완료
2024-05-13
8
답변 완료
2024-04-16
9
답변 완료
2023-12-08
10
답변 완료
2023-11-21
상품정보이미지