■ 제품필수정보

제조사	SKF
제조사품명	1200 ETN9
간략설명	SKF Self Aligning Ball Bearing - Plain Race Type, 10mm I.D, 30mm O.D

■ 제품사양

Inside Diameter = 10mm Outside Diameter = 30mm Ball Bearing
타입 = Self Aligning Race Width = 9mm End
타입 = Open
행 수 = 2 Static Load Rating = 1.18kN Material = Steel Cage Material = Fibreglass Reinforced PA Race
타입 = Plain Dynamic Load Rating = 5.53kN Bore
타입 = Parallel instruction leaflet. Double Row Self - Aligning. Radial Self-Aligning Ball Bearing. These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (
타입 2RS1). Open Bearings. ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores. Sealed bearings. 2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances. TN suffix denotes polyamide cage