■ 제품필수정보

제조사	RawlPlug
제조사품명	R-RNT-M4X30
간략설명	RawlPlug Black Rubber, Steel Wall Plug, 24mm Length, 8mm Fixing Hole Diameter

■ 제품사양

색상 = Black Length = 24mm Material = Rubber, Steel Fixing Hole Diameter = 8mm Rawlnut??Multipurpose Fixing. The Rawlnut??multi-purpose fixing consists of a rubber sleeve with a flange at one end and a bonded-in nut at the other. Features and Benefits. ;ul> ;li>Flexi Plug with Screw Fixings. ;/li> ;li>Lightweight to medium weight fixing. ;/li> ;li>Excellent for use with unknown substrates and holes. ;/li> ;li>Vibration and corrosion resistant. ;/li> ;li>Rubber flange fits flush at the drilled holes surface. ;/li> ;li>Made from synthetic rubber with a metal screw fitting. ;/li> ;li>Bonded insert ;/li> ;li>Guaranteed tight fixing. ;/li> ;/ul>. Typical Masonry Fixings Applications. ;ul> ;li>Picture hanging. ;/li> ;li>Lighting. ;/li> ;li>Shelving. ;/li> ;li>Trunking. ;/li> ;li>Cable conduits and wires. ;/li> ;/ul>. Material the Flexi Plug is Compatible with?. ;ul> ;li>Solid brick. ;/li> ;li>Hollow brick. ;/li> ;li>Vertically perforated clay block. ;/li> ;li>Lightweight concrete block. ;/li> ;li>Hollow lightweight concrete block. ;/li> ;li>Aerated concrete block. ;/li> ;li>Plasterboard. ;/li> ;li>Chipboard. ;/li> ;/ul>. Flexi Plugs Available?. ;ul> ;li>Stock numbers ; 279098 279098 , M4 Wall Plug, length 20 mm, fixing hole diameter 8 mm, fixing thickness 4 mm. ;/li> ;li>Stock number ; 279105 279105 , M4 Wall Plug, length 30 mm, fixing hole diameter 8 mm, fixing thickness 14 mm. ;/li> ;li>Stock number ; 279111 279111 , M5 Wall Plug, length 20 mm, fixing hole diameter 10 mm, fixing thickness 5 mm. ;/li> ;li>Stock number ; 279127 279127 , M5 Wall Plug, length 30 mm, fixing hole diameter 10 mm, fixing thickness 16 mm. ;/li> ;li>Stock number ; 279133 279133 , M5 Wall Plug, length 40 mm, fixing hole diameter 10 mm, fixing thickness 30 mm. ;/li> ;/ul>. How to use the Flexiplug?. ;ul> ;li>Drill the hole (for solid material drill the hole to the length of the screw and fixture thickness). ;/li> ;li>Clean out the drilled hole removing any sharp edges that may damage the fixing. ;/li> ;li>Insert the fixing up to the flange of the fixing. ;/li> ;li>Put the fixture into position, insert the screw and start to tighten. This will compress the fixing sleeve and you will have a secure fitting. ;/li> ;li>Never overtighten the screw fixing. ;/li> ;li>This works well in uniform and irregular shaped drilled holes. ;/li> ;/ul>