■ 제품필수정보

제조사	SKF
제조사품명	AOH 3048
간략설명	SKF Bearing Withdrawal Sleeves 260 x 240 x 116mm For Use With HM 3052, HMV 52 E, AOH 3048

■ 제품사양

타입 = Bearing Withdrawal Sleeves
크기 = 260 x 240 x 116mm Inner Diameter = 220mm For Use With = HM 3052, HMV 52 E SKF Bearing Withdrawal Sleeves - AOH 304 Use this hydraulic withdrawal sleeve from SKF to mount and dismount a bearing from the cylindrical seat of a stepped shaft. Simply push it into the bore of the bearing to reduce the clearance from the shaft and achieve a tight fit. The sleeve features a duct with G 1/4 thread for oil injection, which virtually eliminates friction and makes dismounting easy. It has a bore diameter of 220 mm, with a small taper to an outside diameter of 240 mm for easy fitting to standard equipment.??Coated with a solvent-free rust inhibitor to prolong the life of the product ??Oil injection method makes lubrication easy ??Bearing can be mounted at any point on the shaft Application information ??Automotive workshops ??Rotating industrial machinery ??Wind turbine industry How do I mount a tapered bearing using a withdrawal sleeve? Coat both mating surfaces with a thin layer of light oil then push the bearing onto the sleeve. Install the appropriate accessories, fittings and pipes and inject oil until the mating surfaces are separated by a thin film. Open the oil release valve to the pump used for injection and allow the oil to drain for at least 20 minutes.