■ 제품필수정보

제조사	Festo
제조사품명	VPPM-6L-L-1-G18-0L6H-V1N-S1
간략설명	Festo G 1/8 Pneumatic Regulator - 0.06bar to 6bar, 1/8 in, 8bar max. input, 542228

■ 제품사양

Port Connection = G 1/8 Minimum Outlet Pressure = 0.06bar Maximum Outlet Pressure = 6bar Maximum Input Pressure = 8bar Manufacturer
시리즈 = VPP Pressure Gauge Port Size = G 1/8 Port Connection Thread Size = 1/8 in Pressure Gauge Port Thread Size = 1/8 in Typical Flow Rate = 900L/min Port Connection Thread Standard = G
최소 작동 온도 = +10°C
최대 작동 온도 = +50°C Overall Width = 41.5mm Festo G 1/8 Pneumatic Regulator, 0.06 Bar to 6 Bar - VPP
시리즈 - VPPM-6L-L-1-G18-0L6H-V1N-S1 This three-way pneumatic regulator from Festo lets you precisely adjust pressure and preset piston and rotational speeds. An integrated control circuit responds to changes and alters the pressure accordingly. This helps improve efficiency and reduce cycle times by quickly achieving a stable pressure. The unit effectively manages fluctuating temperatures and prevents pressure drifting in response to changing environmental conditions. An IP65 rating means its protected from dust and water jets.??Maximum input pressure of 8 bar ??Minimum outlet pressure of 0.06 bar ??Maximum outlet pressure of 6 bar ??Port connection of G 1/8 ??M12 plug connection ??Typical flow rate of 900 L/min ??Pilot actuated diaphragm valve ??Electrical actuator ??LED display ??Pressurisation diameter of 6 mm ??Exhaust diameter of 4.5 mm ??Wrought anodised aluminium alloy housing ??Maximum current consumption of 300 mA ??Maximum electrical power consumption of 7 W ??Compressed air temperature range of +10°C to +50°C ??Operating temperature range of 0°C to +60°C ??
무게 of 400 g Range Information ??The Festo range of VPP proportional pressure regulators offers reliable regulation through a two-stage control circuit with multi-sensor control ??These technologically advanced units report the pressure reached as an electrical signal and can also diagnose a specified value that cannot be reachedThe Festo VPPM Modular proportional pressure regulator is a 3-way in-line valve design with G1/8 thread connection and two-stage control circuit for stable. The pressure range is up to 6 bar.Pressurisation - 6 mm Nominal diameter, exhaust - 4.5 mm Assembly position - any