■ 제품필수정보

제조사	Infineon
제조사품명	CY2308SXI-1
간략설명	Infineon CY2308SXI-1 PLL Clock Buffer 16-Pin SOIC

■ 제품사양

칩당 요소 수 = 1 Maximum Supply Current = 45 mA Maximum Input Frequency = 133.3MHz
장착형태 = Surface Mount
패키지 = SOIC
핀수 = 16
크기 = 9.98 x 3.98 x 1.47mm Length = 9.98mm Width = 3.98mm
높이 = 1.47mm Maximum Operating Supply Voltage = 3.6 V
최대 작동 온도 = +85 °C Maximum Output Frequency = 100MHz Minimum Operating Supply Voltage = 3 V
최소 작동 온도 = -40 °C The CY2308 is a 3.3 V Zero Delay Buffer designed to distribute high speed clocks in PC, workstation, datacom, telecom, and other high performance applications. The part has an on-chip PLL that locks to an input clock presented on the REF pin. The PLL feedback is driven from external FBK pin, so user has flexibility to choose any one of the outputs as feedback input and connect it to FBK pin. The input-to-output skew is less than 250 ps and output-to-output skew is less than 200 ps. The CY2308 has two banks of four outputs each that is controlled by the select inputs as shown in the table Select Input Decoding on page 3. If all output clocks are not required, Bank B is three-stated. The input clock is directly applied to the output for chip and system testing purposes by the select inputs. The CY2308 PLL enters a power down state when there are no rising edges on the REF input. In this mode, all outputs are three-stated and the PLL is turned off resulting in less than 25 μA of current draw.