■ 제품필수정보

제조사	Honeywell
제조사품명	LSQ310-20
간략설명	Honeywell HDLS Series Rod Limit Switch, NO/NC, SPDT, Die Cast Zinc Housing, 600V ac Max, 10A Max

■ 제품사양

Actuator
타입 = Rod Pole and Throw Configuration = SPDT Normal State Configuration = NO/NC Maximum Current = 10A Housing Material = Die Cast Zinc Maximum AC Voltage = 600V Maximum DC Voltage = 250V
시리즈 = HDLS Action
타입 = Snap Action Length = 106.42mm
최소 작동 온도 = -40°C EN60947-5-1, IEC947-5-1. UL, CSA. Maintained Contact, Spoke Actuator Limit Switch. This spoke actuator switch is used to detect a transient target and remember its position. The target passes through the spoke rotating the spoke by a quarter turn. This toggles the switch, normally a closed circuit, from ON to OFF. If another target transitions through the spoke, it will again toggle the switch this time from OFF to ON. Alternatively, the target can return back through the spoke again toggling the switch from OFF to ON. The spoke once rotated will maintain its position until it is moved to a new section - this is unlike normal limit switch actuation which normally will want to return to its rest position - with this switch there are 4 rest positions at each 90° points in a 360° rotation. The tip over point is at 60° at which point the spoke will rotate to the next segment position.