■ 제품필수정보

제조사	Winbond
제조사품명	W972GG6KB25I
간략설명	Winbond W972GG6KB25I, SDRAM 2Gbit Surface Mount, 800MHz, 1.7 V to 1.9 V, 84-Pin WBGA

■ 제품사양

Memory Size = 2Gbit SDRAM Class = DDR2 Data Rate = 800MHz
데이터 버스 = 16bit Address Bus Width = 17bit Number of Bits per Word = 8bit Maximum Random Access Time = 0.4ns Number of Words = 256M
장착형태 = Surface Mount
패키지 = WBGA
핀수 = 84
크기 = 12.6 x 8.1 x 0.6mm
높이 = 0.6mm Length = 12.6mm Maximum Operating Supply Voltage = 1.9 V The W972GG6KB is a 2G bits DDR2 SDRAM, and speed involving -18, -25/25I, and -3/-3I.Double Data Rate architecture: two data transfers per clock cycle CAS Latency: 3, 4, 5, 6 and 7 Burst Length: 4 and 8 Bi-directional, differential data strobes (DQS and /DQS ) are transmitted / received with data Edge-aligned with Read data and center-aligned with Write data DLL aligns DQ and DQS transitions with clock Differential clock inputs (CLK and /CLK) Data masks (DM) for write data Commands entered on each positive CLK edge, data and data mask are referenced to both edges of /DQS Posted /CAS programmable additive latency supported to make command and data bus efficiency Read Latency = Additive Latency plus CAS Latency (RL = AL + CL) Off-Chip-Driver impedance adjustment (OCD) and On-Die-Termination (ODT) for better signal quality Auto-precharge operation for read and write bursts Auto Refresh and Self Refresh modes Precharged Power Down and Active Power Down Write Data Mask Write Latency = Read Latency - 1 (WL = RL - 1) Interface: SSTL_18