■ 제품필수정보

제조사	Onsemi
제조사품명	NCP1013AP100G
간략설명	onsemi NCP1013AP100G, PWM Controller, 10 V, 100 kHz 7-Pin, PDIP

■ 제품사양

Maximum Switching Frequency = 100 kHz Control Method = Current
장착형태 = Through Hole
패키지 = PDIP
핀수 = 7 Maximum Duty Cycle = 72% Length = 10.16mm Width = 7.11mm
높이 = 4.95mm Minimum Operating Supply Voltage = -3 V Built-in 700V MOSFET with Typical RdsON of 11 or 22 Ohms Large Creepage Distance between High-Voltage Pins Current- Mode Fixed Frequency Operation: 65kHz - 100kHz - 130kHz Skip-Cycle Operation at Low Peak Currents Only: No Acoustic Noise! Dynamic Self-Supply, No Need of an Auxiliary Winding Internal 1ms Soft-Start Auto-Recovery Internal Output Short-Circuit Protection Latched Overvoltage Protection with Auxiliary Winding Operation Frequency Jittering for better EMI Signature Below 100 mW Standby Power if Auxiliary Winding is Used Internal Temperature Shutdown Direct Optocoupler Connection SPICE Models Available for Transient AC analysisEnd Products Low Power AC/DC Adapter for Chargers Applications Auxiliary Power Supplies