■ 제품필수정보

제조사	Microchip
제조사품명	KSZ9031RNXCC
간략설명	Microchip , 1-Channel Ethernet Transceiver 48-Pin QFN, KSZ9031RNXCC

■ 제품사양

Standard Supported = 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 Number of Channels per Chip = 1 Typical Data Rate = 1000Mbit/s Power Supply
타입 = Single
일반 작동 공급 전압 = 3.3 V
장착형태 = Surface Mount
패키지 = QFN
핀수 = 48
크기 = 7 x 7 x 0.8mm
최대 작동 온도 = +70 °C
최소 작동 온도 = 0 °C The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.Single-chip 10/100/1000Mbps Ethernet transceiver KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full) On-chip termination resistors for the differential pairs On-chip LDO controller to support single 3.3V supply operation ??requires only one external FET to generate 1.2V for the core Jumbo frame support up to 16KB 125MHz Reference Clock Output Energy-detect power-down mode