■ 제품필수정보

제조사	Microchip
제조사품명	MCP2562-H/MF
간략설명	Microchip MCP2562-H/MF, CAN Transceiver 1Mbps ISO 11898-2, ISO 11898-5, 8-Pin DFN

■ 제품사양

Maximum Data Rate = 1Mbps Number of Transceivers = 1 Standard Supported = ISO 11898-2, ISO 11898-5 Power Down Mode = Normal, Standby Maximum Supply Current = 70 mA
장착형태 = Surface Mount
패키지 = DFN
핀수 = 8
크기 = 3 x 3 x 0.95mm Length = 3mm Width = 3mm
높이 = 0.95mm Maximum Operating Supply Voltage = 5.5 V Minimum Operating Supply Voltage = 4.5 V Automotive Standard = AEC-Q100 The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: ??MCP2561 with SPLIT pin ??MCP2562 with VIO pinSupports 1 Mb/s operation Implements ISO-11898-5 standard physical layer requirements Very low standby current (Typ: 5μA) VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus Power-on Reset and voltage brown-out protectionon VDD and VIO pin