■ 제품필수정보

제조사	Broadcom
제조사품명	HCPL-315J-500E
간략설명	Broadcom, HCPL-315J-500E IGBT, MOSFET Output Dual Optocoupler, Surface Mount, 8-Pin SO

■ 제품사양

장착형태 = Surface Mount Output Device = IGBT, MOSFET Maximum Forward Voltage = 1.95V Number of Channels = 2 Number of Pins = 8
패키지 = SO Typical Rise Time = 0.1µs Maximum Input Current = 16 mA Isolation Voltage = 5000 Vrms Logic Output = Yes Typical Fall Time = 0.1µs
시리즈 = HCPL-315J The Broadcom HCPL-315J gate drive optocoupler consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, it can be used to drive a discrete power stage which drives the IGBT gate.0.5 A Minimum Peak Output Current 15 kV/us Minimum Common Mode Rejection (CMR) at VCM = 1500 V 1.0 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive ICC = 5 mA Maximum Supply Current Under Voltage Lock-Out Protection (UVLO) with Hysteresis Wide Operating VCC Range: 15 to 30 Volts 0.5 us Maximum Propagation Delay /-0.35 us Maximum Delay Between Devices/Channels Industrial Temperature Range: -40 degrees C to 100 degrees C Channel One to Channel Two Output Isolation = 1500 Vrms/1 min.