■ 제품필수정보

제조사	SEGGER
제조사품명	5.07.01 Flasher ARM
간략설명	SEGGER Flasher ARM Programmer

■ 제품사양

Product
타입 = Programmer For Use With = Flash microcontrollers Kit Name = Flasher ARM Programmer Ethernet cable, 20-pin target ribbon cable, RS-232 serial cable, USB cable. Flasher ARM Programmer. The Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and an ARM core. Flasher ARM is designed for programming Flash targets with the J-Flash software or stand-alone. In addition, Flasher ARM has all of the J-Link functionality. Supported Processors. ARM Cortex-A: A5/A7/A8/A9/A12/A15/A17 ARM Cortex-M: M0/M0+/M1/M3/M4/M7 ARM Legacy: ARM7, ARM9, ARM11. Features. Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program) 10/100 Ethernet via RJ45 connector Supports internal and external Flash memory devices 64MB memory for storage of target program Serial in target programming supported Data files can be updated as mass storage or via J-Flash Host interface: USB 2.0 or RS-232 DE9 connector Target interface: JTAG/SWD 20-pin Powered through USB connection Can be used as J-Link (JTAG emulator) with download speed up to 1MB/sec Programming speed typically between 30KB/sec and 1MB/sec Max programming speed depends on target hardware and max programming speed of the Flash memory ASCII command interface to control Flasher without use of PC program Authorized Flashing allows limit to number of Flash programming cycles and to protect the Flasher against non-authorized access in case of external production
크기: 121 x 66 x 30mm Free software updates, 2 years of support