■ 제품필수정보

제조사	Mean Well
제조사품명	NDR-75-12
간략설명	Mean Well NDR Switch Mode DIN Rail Power Supply, 90 ??264V ac ac Input, 12V dc dc Output, 6.3A Output, 75W

■ 제품사양

AC or DC Input Voltage = ac AC or DC Output Voltage = dc Input Voltage = 90 ??264V ac Output Voltage = 12V dc Output Current = 6.3A Power Rating = 75W Number of Outputs = 1 Electrical Phase = 1
타입 = Switch Mode
높이 = 125mm
장착형태 = DIN Rail Mount Minimum Temperature = -20°C Mean Well NDR
시리즈 Single Output Industrial DIN Rail Power Supply. Economical and slim, the NDR range of power supplies (PSU) can be installed on TS-35/7.5 or TS-35/15 mounting rails and have been designed to allow space saving within cabinets. The entire series conforms to EN61000-3-2 and has been designed with metal housing enhancing the PSUs power dissipation. The entire series can operate between -20°C and 60°C under air convection. Features and Benefits. Universal AC input/Full range Short circuit/Overload/Over voltage/Over temperature protections Can be installed on DIN Rail TS-35/7.5 or 15 Cooling by free air convection UL 508 (industrial control equipment) approved EN61000-6-2 (EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty Built-in active PFC function (NDR-240 ; NDR-480). Product Application Information. The NDR series PSU by Mean Well is ideal for use in industrial control systems, semiconductor fabrication equipment, factory automation and electro-mechanical apparatus. Why use a DIN Rail power supply?. The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed. DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more. Points to consider when buying a DIN Rail power supply. DIN Rail size ??There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types ??It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared. Fixed or adjustable output voltage or current ??In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential. Cabling and wiring ??The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat. Efficiency ??Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling. Input voltage range ??If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required. Standards ??If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.