■ 제품필수정보

제조사	Festo
제조사품명	DSNU-25-25-PPS-A
간략설명	Festo Pneumatic Cylinder - 559282, 25mm Bore, 25mm Stroke, DSNU Series, Double Acting

■ 제품사양

Stroke = 25mm Bore = 25mm Action = Double Manufacturer
시리즈 = DSNU Pneumatic Connection = G 1/8 Piston Rod Thread
성별 = Male Cushioning
타입 = Air
크기 = 27 x 166.5mm Length = 166.5mm Maximum Operating Pressure = 10 bar Model Number p = 559282 DSNU
시리즈 Roundline Cylinders - Self Adjusting Pneumatic Cushioning. Festo DSNU series round pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a stainless steel piston rod within a 3 component system that provides excellent running performance and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. An extensive range of accessories makes it possible to install the DSNU cylinders virtually anywhere. Self Adjusting Pneumatic Cushioning. The DSNU PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours. Features and Benefits. Conforms to ISO 6432 providing standardised metric mounting dimensions Stainless steel piston rod with threaded connector Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications. Long service life Double acting operation. How do I mount the pneumatic cylinder?. The DSNU series pneumatic round actuators conform to ISO 6432 standards allowing them to be mounted in any position to suit the required application. The ISO 6432 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.