■ 제품필수정보
■ 제품사양
Tester
타입 =
단열재 Tester Minimum Test Voltage = 10V Maximum Test Voltage = 1000V Maximum
단열재 Resistance Measurement = 200GΩ Display
타입 = Analogue, Dual Digital
테스트 전류 = 205mA Battery Life = 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
최소 작동 온도 = -20°C
최대 작동 온도 = +55°C Power Source = Battery Safety Category Level = CAT IV Safety Category Voltage = 600V Safety Category = CAT IV 600V Width = 50mm Megger
단열재 and Continuity TestersThe Megger MIT420/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access.
단열재 testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed on the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50V to 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges.Features and Benefits
단열재 testing up to 1000V and 200Gohm range Polarisation index, dielectric absorption ratio, variable test voltage and result storage Stabilised insulation test voltage (New) Single range, faster continuity testing from 0.01ohm to 1Mohm (New) 600V TRMS AC and DC voltage measurement Live circuit detection and protection User variable insulation test voltage from 100V to 1000V (New) depending on model Test result storage and Bluetooth® downloading depending on the model Rechargeable options for mains and car charging (New) depending on the modeApplicationsIndustrial sites Cable testing Motor testing Automotive ESD Panel building Avionics Maintenance sitesCertificationsCAT IV 600V IP54 rated
