■ 제품필수정보

제조사	Microchip
제조사품명	PIC24FJ256GB410-I/PT
간략설명	Microchip PIC24FJ256GB410-I/PT, 16bit PIC Microcontroller, PIC24F, 32MHz, 256 kB Flash, 100-Pin TQFP

■ 제품사양

패밀리명 = PIC24F
패키지 = TQFP
장착형태 = Surface Mount
핀수 = 100
코어 = PIC
데이터 버스 = 16bit
프로그램 메모리 크기 = 256 kB
최대 주파수 = 32MHz
RAM 크기 = 16 kB
USB 채널 = 1
PWM 단위 수 = 2
일반 작동 공급 전압 = 2 ??3.6 V Length = 10mm PIC24FJxxxGA/GB406/410/412 16-Bit Flash Microcontrollers. The Microchip PIC24FJxxxGA/GB406/410/412 family of Microcontrollers are peripheral rich 16-bit devices suitable for applications that require secure data transfer and storage. Highlights include an on-board Cryptographic Engine, eXtreme Low Power (XLP) features, an LCD Display Controller and USB On-The-Go. Of particular note is the Dual Partition Flash with Live Update Capability, this allows the MCU to hold two independent software applications (including boot loader). Furthermore this functionality allows the simultaneous programming of one partition while executing application code from the other. CPU Features. Modified Harvard Architecture Up to 16 MIPS Operation @ 32 MHz 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier 32-Bit by 16-Bit Hardware Divider 16 x 16-Bit Working Register Array. Cryptographic Engine Features. Performs NIST Standard Encryption/Decryption Operations without CPU Intervention AES Cipher Support for 128, 192 and 256-Bit Keys DES/3DES Cipher Support Supports ECB, CBC, OFB, CTR and CFB128 Modes Programmatically Secure OTP Array for Key Storage True Random Number Generation Battery-Backed RAM Key Storage. Dual Partition Flash Features. Capable of Holding Two Independent Software Applications, Including Boot Loader Permits Simultaneous Programming of One Partition while Executing Application Code from the Other Allows Run-Time Switching Between Active Partitions. eXtreme Low-Power (XLP) Features. Multiple Power Management Options Alternate Clock Modes for On-the-Fly Switching to Lower Clock Speeds Extreme Low-Power Current Consumption for Deep Sleep: WDT 650 nA @ 2V typical, RTCC 650 nA @ 32 kHz 2V typical; Deep Sleep current, 60 nA typical 160 μA/MHz in Run mode. Peripheral Features. 10/12-Bit 200/500 ksps Analogue-to-Digital Converter (ADC) Converter ??16 or 24 Channels One 10-Bit 1 Msps Digital-to-Analogue Converter (DAC) Three Enhanced Analogue Comparators Charge Time Measurement Unit (CTMU) for Capacitive Touch Sensing LCD Display Controller Up to Five External Interrupt Sources Peripheral Pin Select (PPS) Six-Channel Direct Memory Access DMA Five 16-Bit Timers/Counters with Prescalers - Can be paired as 32-bit timers/counters Six Input Capture modules, each with a Dedicated 16-Bit Timer Six Output Compare/PWM modules, each with a Dedicated 16-Bit Timer Four Single Output CCPs (SCCP) and Three Multiple Output CCPs (MCCP) Modules Enhanced Parallel Master/Slave Port (EPMP/EPSP) Hardware Real-Time Clock/Calendar (RTCC) USB v2.0 On-The-Go (OTG) Compliant Module Four 3-Wire/4-Wire SPI modules Three I2C Modules Six UART Modules Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator Four Configurable Logic Cells (CLCs)