■ 제품필수정보

제조사	Pico Technology
제조사품명	TA042
간략설명	Pico Technology TA Series TA042 Oscilloscope Probe, Active, Differential Type, 100MHz, 1:100, 1:1000, 1kV Max

■ 제품사양

Probe
타입 = Active, Differential Attenuation = 1:100, 1:1000 Bandwidth = 100MHz Maximum Common Mode Input Voltage = 1kV Connector
타입 = BNC Model Number p = TA042 Number of Probes = 2 Safety Category Level = CAT III
시리즈 = TA Safety Category = 1000 V, CAT III 1400V Rise Time = 3.5ns Pico Technology Oscilloscope ProbeThe Pico Technology TA042 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±1400V. It can be used with a signal speed of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.Features and BenefitsBandwidth is DC to 100MHz (??dB) Attenuation ratio is 100:1/1000:1 Accuracy is ±2% Input impedance is 4Mohm ll7pF each side to ground Differential range is (100:1) ±140V (DC + peak AC) or 140VRMS Maximum differential is (100:1) ±1400V (DC + peak AC) or 1000VRMS Common mode range is ±1400V (DC + peak AC) or 1000VRMS (1/100 & 1/1000) Absolute maximum voltage is ±1400V (DC + peak AC) or 1000VRMS CAT III (1/100 & 1/1000) Swing is ±7V into 50Kohm load Offset (typical) is <±5mV Noise (typical) is 0.9mVRMS Source impedance is 50 CMRR (typical) is 80dB at 60Hz and 50dB at 1MHz Ambient operating temperature ranges between -10°C and 40°C Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptorApplicationsSafe measurement in power circuit Acquisition of low speed balanced differential signals found in serial communications buses Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays Signals in the milliV range from sensors and other instrumentationCertificationsIEC-1010.1 IEC-1010.2-031 CAT III Pollution Degree 2.