■ 제품필수정보

제조사	Pico Technology
제조사품명	TA041
간략설명	Pico Technology TA Series TA041 Oscilloscope Probe, Active, Differential Type, 25MHz, 1:10, 1:100, 700V Max

■ 제품사양

Probe
타입 = Active, Differential Attenuation = 1:10, 1:100 Bandwidth = 25MHz Maximum Common Mode Input Voltage = 700V Connector
타입 = BNC Model Number p = TA041 Number of Probes = 2
시리즈 = TA Safety Category = 700 V, CAT III ±700V Pico Technology Oscilloscope ProbeThe Pico Technology TA041 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 25Hz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.Features and BenefitsBandwidth is DC to 25MHz (??dB) Attenuation ratio is 10:1/100:1 Accuracy is ±2% Input impedance is 4Mohm ll5.5pF each side to ground Differential range is (10:1) ±70V (DC + peak AC) or 70VRMS Maximum differential is (100:1) ±700V (DC + peak AC) or 700VRMS Common mode range is ±700V (DC + peak AC) or 700VRMS (10:1 & 100:1) Absolute maximum voltage is ±1400V (DC + peak AC) or 1000VRMS (10:1 & 100:1) Swing is ±7V into 2kohm load Offset (typical) is <±5mV Noise (typical) is 0.7mVRMS Source impedance is 1ohm at 1kHz and 8ohm at 20kHz CMRR (typical) is 86dB at 50Hz and 66dB at 1MHz Ambient operating temperature ranges between -10°C and 40°C Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptorApplicationsSafe measurement in power circuit Acquisition of low speed balanced differential signals found in serial communications buses Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays Signals in the milliV range from sensors and other instrumentationCertificationsIEC-1010.1 IEC-1010.2-031 CAT III Pollution Degree 2.