■ 제품필수정보
제조사 |
Microchip |
제조사품명 |
LAN9252I/ML |
간략설명 |
Microchip LAN9252I/ML, Ethernet Controller, 100Mbps MDI, MDIX, MII, RMII, Host Bus, 3.3 V, 64-Pin QFN |
■ 제품사양
Physical Network
타입 = 100BaseTX, 10BaseT Host Interface = Host Bus Network Interface = MDI, MDIX, MII, RMII Communication Mode = Full Duplex, Half Duplex Data Rate = 100Mbps Loopback Mode = Internal Standard Supported = ANSI X3.263, IEEE 802.3, IEEE 802.3u
장착형태 = Surface Mount
패키지 = QFN
핀수 = 64 Auto-Negotiation = Yes DMA Support = Yes
일반 작동 공급 전압 = 3.3 V
크기 = 9 x 9 x 0.95mm
최대 작동 온도 = +85 °C LAN9252 EtherCAT® Slave Controllers. The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO. Features. 2/3-port EtherCAT® Slave Controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers Interfaces with most 8/16-bit Embedded Controllers; can also interface with 32-bit Embedded Controllers with an 8/16-bit bus Dual integrated Ethernet PHYs with HP Auto-MDIX Cable diagnostic support 100BASE-FX support via an External Transceiver 1.8V to 3.3V variable voltage I/O Integrated 1.2V Regulator for single 3.3V operation