■ 제품필수정보

제조사	Fluke
제조사품명	FTPL-1
간략설명	Fluke Fused Fused Test Probe, CAT III, CAT IV, 10A

■ 제품사양

Lead
타입 = Fused Test Probe Fused = Yes
Current 등급 = 10A Safety Category Voltage = 1000 V, 600V Safety Category = CAT III 1000 V, CAT IV 600V
최소 작동 온도 = -20°C
최대 작동 온도 = +50°C Safety Category Level = CAT III, CAT IV Fluke FTPL-1 Fused Test Probe Set with Test Leads. Brought to you by Fluke, a SureGrip Fused Test Probe and Test Lead set with built-in replaceable fuses for additional measurement protection. the fantastic build quality ensures a near-perfect performance for the intended application. All models are highly reliable and excellent quality. Features and Benefits. Built-in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating 2 mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs 1.5 m silicone Insulated wire resists heat and cold Operating temperature: 20 °C to 50 °C (-5 °F to 120 °F) CAT III 1000 V, CAT IV 600 V, 10 A rating. What are test leads?. These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. What are test probes?. Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. What are the differences between safety categories?. For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.