■ 제품필수정보
■ 제품사양
Tester
타입 =
단열재 Tester Minimum Test Voltage = 50V Maximum Test Voltage = 1000V Maximum
단열재 Resistance Measurement = 199GΩ Display
타입 = Analogue, Digital
테스트 전류 = ??mA
최소 작동 온도 = -10°C
최대 작동 온도 = +50°C Power Source = Battery Safety Category Level = CAT II, CAT III, CAT IV Safety Category Voltage = 1000 V, 300 V, 600 V Safety Category = CAT II 1000 V, CAT III 600 V, CAT IV 300V Width = 130mm METRISO TECH insulation tester, DAkkS calibration certificate, set batteries, carrying strap, alligator clip, KS17-4 cable set, condensed operating instructions, supplement Safety Information, detailed operating instructions for download on the website www.gossenmetrawatt.com. METRISO TECH
단열재 Tester. The METRISO TECH insulation and resistance measuring instrument allows for quick and effective testing of protective measures in accordance with: DIN VDE 0100, ÖVE-EN 1 (Austria), SEV 1000 (Switzerland) and regulations specific to other countries as well.
단열재 measurement per EN 61557-2 / VDE 0413 part 2 Low-resistance measurement per EN 61557-4 / VDE 0413 part 4 Voltage testing and measurement up to 1000 V Intelligent filter: precise and measurement-dependent activation for the measurement of very high resistances Digital and analog display, backlit Indication of dangerous contact voltage LED Acoustic signalling when limit value is exceeded Detection of interference voltage in switch position OFF Overvoltage protection Protects the instrument in the event of inadvertent connection to mains power Fuse link for all resistance measuring ranges Electronic fuse for the protection of low resistance and resistance measurement Rlo and R Compact and rugged for service calls under harsh conditions One measuring point self-test with test resistance of 10 MΩ per IEC/HD 60364-6 / EN 50110
