■ 제품필수정보

제조사	IDEM
제조사품명	142076A
간략설명	IDEM GLS Rope Pull Switch, 80m, 2NO/2NC, Straight

■ 제품사양

Normal State Configuration = 2NO/2NC Cable Length = 80m Mounting Orientation = Straight IP Rating = IP67 Number of Poles = 4P
시리즈 = GLS Range = Guardian Line Length = 239mm Width = 63mm Depth = 54mm Housing Material = Die Cast Aluminium Maximum Current = 3A IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1. CE, cULus, TUV. ; 826-4079 826-4079 ; ; 826-4088 826-4088 have an E-stop, ; 826-4081 826-4081 , ; 826-4085 826-4085 ; ; 826-4094 826-4094 have an E-stop and LED. IDEM Guardian Line GLS Standard Safety Rope Pull Switches. The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection. In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950. Switch mechanism will latch the instant the safety contacts open, ISO13850 standard Upto 60m can be covered using only a single switch Upto 80m can be covered using two switches Positive break contacts to IEC60947-5-1 Robust yellow diecast housing IP67 protection Rugged integral sealing bellows mean they can be high pressure hosed All internal screws are stainless steel Easy to wire with 3 x M20 conduit entries 4 pole, either 3NC / 1NO, 2NC / 2NO or 4NC