■ 제품필수정보

제조사	Burkert
제조사품명	221605
간략설명	Burkert Solenoid Valve 221605, 2 port(s) , NC, 230 V ac, 1/2in

■ 제품사양

Supply Voltage = 230 V ac Number of Ports = 2 Operation = Pilot Connection = 1/2 in G Female Connection Size = 1/2in Default Valve Position = NC Suitable Applications = Liquid
타입 = 2/2 Orifice Diameter = 13mm Body Material = Brass Maximum Working Pressure = 10 bar Operating Temperature Range = -10 ??+80 °C Servo Assist = Yes
최대 작동 온도 = +80°C Flow Factor Kv = 3.6m³/h Burkert Solenoid ValveThe Burkert 6213 series 1/2inG female solenoid valve has a supply voltage of 230VAC. This 2-port NC position valve has soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision-engineered main body path helps ensure quiet water hammer free operation. It is manufactured from brass and designed for use with water and inert liquids and gases. Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.Features and BenefitsMaximum working pressure is 10bar BSP parallel ports suitable for use with compression fittings Compact size to aid installation when space is limited Coupled spring diaphragm system opened without differential pressure Epoxy encapsulated coils Flow factor(Kv) is 3.6m³/h Flow-optimized housing and diaphragm geometry for high flow Operating temperature is between -10°C and 80°C Power consumption is 10W Sealed coil and high flow rate Three-pin DIN connector can be positioned through 360° in 90° incrementsApplicationsCompressed air and vacuum systems Heating and refrigeration Water treatment and swimming pool technologyCertificationsIP65 rated