■ 제품필수정보

제조사	Reliance Water Controls
제조사품명	PTEM550753
간략설명	Reliance 10bar Temperature and Pressure Relief Valve With Male BSP 1/2 in BSP Male Connection

■ 제품사양

Connection = 1/2 in BSP Male Maximum Set Pressure = 10bar Maximum Temperature = +95°C For Use With = Hot Water Connection
성별 = Male Thread Size = 1/4in Thread Standard or Connection
타입 = BSP WRAS. ( ; 7948432 7948432 no PTFE), ( ; 7948439 7948439 , ; 7948448 7948448 and ; 7948457 7948457 with probe). Full Cartridge Pressure and Temperature Relief Valve. All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system. Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again. The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used. Protect against temperature rising above 95ﾟC Prevent over pressurisation Twist toop cartridge design for easy servicing Range of different pressure settings and different probe lenghts