■ 제품필수정보

제조사	Onsemi
제조사품명	NCV33204DTBR2G
간략설명	NCV33204DTBR2G onsemi, Low Voltage, Op Amp, RRIO, 2.2MHz, 1.8 ??12 V, 14-Pin TSSOP

■ 제품사양

Amplifier
타입 = Low Voltage
장착형태 = Surface Mount
패키지 = TSSOP Power Supply
타입 = Single Number of Channels per Chip = 4
핀수 = 14 Typical Single Supply Voltage = 1.8 ??12 V Typical
이득 Bandwidth Product = 2.2MHz Typical Slew Rate = 1V/µs
최대 작동 온도 = +125 °C Rail to Rail = Rail to Rail Input/Output Typical Input Voltage Noise Density = 25nV/??Hz MC33201/2/4, NCV33202/4, 12V Low Noise, Rail-to-Rail I/O, High Output Drive, Operational Amplifiers, ON Semiconductor. The ON Semiconductor MC33201/2/4, NCV33202/4 Op Amps provide rail-to-rail operation on both the input and output. Drive inputs as high as 200 mV beyond the supply rails without phase reversal on the outputs, and the output can swing within 50 mV of each rail. This rail-to-rail operation enables you to make full use of the supply voltage range available. Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. Low noise and distortion with a high slew rate and drive capability make them ideal for audio applications. Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground) Input Voltage Range Includes both Supply Rails Output Voltage Swings within 50 mV of both Rails No Phase Reversal on the Output for Over-driven Input Signals High Output Current (ISC = 80 mA, Typical) Low Supply Current (ID = 0.9 mA, Typical) 600 W Output Drive Capability Typical
이득 Bandwidth Product = 2.2 MHz