■ 제품필수정보

제조사	RS PRO
제조사품명	5716-240-55-01
간략설명	RS PRO Hand Crimping Tool for Bootlace Ferrule

■ 제품사양

Crimp Connector
타입 = Bootlace Ferrule Ratcheting = No RS Hand Crimp Plier Tool for Bootlace Ferrules. RS hand crimp plier tool for crimping bootlace ferrules with a wire size range of 0.5 to 16mm ;sup>2 ;/sup>. The crimping indents of this bootlace ferrule hand crimp plier tool are clearly marked with the different wire size ranges. Features and Benefits. Supports a wire size of 0.5 to 16 mm² Suitable for crimping bootlace ferrules Ensures integrity the connector termination The indents are clearly marked with the different wire size ranges. Typical Applications. Maintenance ; repair Electrical Installations Computer Interfacing Cable assemblies. FAQ: How easy are they to use? They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes. How do you maintain the product? Movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.