■ 제품필수정보

제조사	Cynergy3
제조사품명	RSF88H100R
간략설명	Cynergy3 RSF80 Series Horizontal External Polypropylene Float Switch, Sensor, 1m Cable, NO/NC, 300V ac Max, 300V dc Max

■ 제품사양

Device
타입 = Sensor
장착형태 = Horizontal External Switch Output = NO/NC Body Material = Polypropylene Cable Length = 1m
최소 작동 온도 = -20°C
최대 작동 온도 = +100°C Maximum AC Voltage = 300V Maximum DC Voltage = 300V Maximum Current = 1 A
시리즈 = RSF80 Cynergy3 Float SwitchThe Cynergy3 float switch is designed for RSF mounting through the wall of a tank, via a in thread without requiring access to NPT the inside of the tank. This switch can be fitted to achieve either make on the rising (N/O) or make on fall (N/C) action by simply rotating it through 180°. It has a maximum power of 100VA. The switch action can be reversed by mounting the float switch, with the float able to move upwards away from the body instead of downwards. WRAS approval explained WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have appropriate quality and standard. What materials can you choose from? Nylon Polypropylene Polypropylene Sulfide (PPS) Note: Suitable for signal switching and use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e. G. filament lamps) loads. This float switch is designed for mounting through the outside wall of a tank using an INNPT or BSP threaded hole or boss. Polypropylene material INNPT or inBSP external mounting 100cm PVC flying leads Product application information: This polypropylene float switch is most suitable for use in water, detergents, vegetable oils, some organic and inorganic chemicals. Typical applications include diesel generators, hydraulic oil and gearbox oil levels.Features and BenefitsChoice of gasket materials: silicone, nitrile, Viton or combination of silicone and nitrile Flying lead Cable length of 1m Maximum current of 1A External fitting inside a tank M12 plug connectionApplicationsDiesel generators Hydraulic oil and gearbox oil levelsCertificationsUL approved WRAS and NSF approved ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007