■ 제품필수정보

제조사	Siemens
제조사품명	3RX9502-0BA00
간략설명	Siemens PLC Power Supply for use with AS-I Power Supply Unit, 125 x 70 x 125 mm, 3RX950

■ 제품사양

Accessory
타입 = PLC Power Supply For Use With = AS-I Power Supply Unit
시리즈 = 3RX950 Output Current = 5 A
최대 작동 온도 = +70°C
크기 = 125 x 70 x 125 mm Siemens Power Supply ModuleThe Siemens 30 Vdc power supply module is designed to use with AS-interface PLCs. The supply line voltage ratings are 120ac/230Vac and output current is 5A. Actuator Sensor Interface, AS-I AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC. A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used). By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours. The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network. Another feature of the AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments. Benefits of AS-I Replaces hard wiring High data speed Low-cost installation Intelligent diagnostics Easy to learn and install Highly flexible Can connect to other Fieldbus systems User-friendly Off-site pre-assembly and test Easy maintenance Faster on-site commissioning Host or stand-alone use Able to use standard sensors and actuators (using modules)Features and BenefitsEasy to learn and install Integrated short circuit protection. Intelligent diagnostics Integrated overload detection Easy maintenance Faster onsite commissioning Ambient operating temperature ranges between -10°C 70°CApplicationsIndustrial automation Robotics Automobile industryCertificationsIP20 rated UL certified CSA certified EAC certified