■ 제품필수정보

제조사	Fluke Networks
제조사품명	FPM-100-M
간략설명	Fluke Networks Fiber QuickMap Multimode Fibre Optic Test Kit

■ 제품사양

Cable
타입 = Multimode Equipment
타입 = Fibre Optic Test Kit Connector
타입 = SC Wavelengths = 850nm Magnification = 200 Operation Test Distance = 1.5km Battery
타입 = AA x 2 Battery Life = 1500 Tests Power Source = Battery Includes = Case, LC Adapter
최대 작동 온도 = +50°C Fluke Networks Fibre Optic Test EquipmentThe Fluke Networks Fiber QuickMap series, fibre optic test equipment has a measurement range of up to 1.5km. This test equipment measures the length and identifies high loss events on multimode (Fiber QuickMap) fibre optic cable. Just like an Optical Time Domain Reflectometers (OTDR), its laser sends light pulses through the fibre and measures the power and timing of light reflected from high loss connections and splices and the end of the fibre. VFLs work well for exposed lengths of fibre near a patch panel by illuminating bad connections and breaks. It is not helpful for cable runs more than a few meters, or when the cable is not visible or accessible, or when the laser light cannot penetrate the jacket. An OTDR provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate. This equipment fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL and provide distance and power information on high losses, breaks and the end of the fibre. It includes a multimode fibre fault locator unit, screw-on interchangeable SC adapter, Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual and batteries.Features and BenefitsOne-button testing and hence it can be used straight out of the box with no user setup required 6-second test time eliminates blind troubleshooting that can last hours Locate multiple incidents in the channel to provide full visibility of any potentially problematic links and connections Locate high loss incidents or breaks, the most common causes of multimode fibre failure Identifies live fibre Locates and measure high reflective incidents, which cause poor network performance with bit error rates Perfect data centre cabling network tester 2 AA alkaline batteries (no battery charger) Battery life of typically 1500 testsApplicationsMeasure and locate high loss splices Measure and locate high loss connections and breaks Locate the end of a fibre Find potential sources of errors caused by reflectance from dirty or poor connections Detect live optical signals before it begins testingCertificationsCE certified CSA certified FCC certified