■ 제품필수정보

제조사	Tektronix
제조사품명	P5200A
간략설명	Tektronix P52XXA Series P5200A Oscilloscope Probe, Differential, High Voltage Type, 50MHz, 1:50, 1:500, 1kV Max

■ 제품사양

Probe
타입 = Differential, High Voltage Attenuation = 1:50, 1:500 Bandwidth = 50MHz Maximum Common Mode Input Voltage = 1kV Model Number p = P5200A
시리즈 = P52XXA Safety Category = CAT II 1000V Tektronix Oscilloscope ProbesThe Tektronix is active deferential voltage oscilloscope probe has a bandwidth of 50MHz and permits selection of 50x or 500x attenuation. It converts floating signals to low voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope. Note: TMDP and THDP
시리즈 probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probes most commonly required set-up controls and operating status. P52xxA
시리즈 probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope. The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. Supplied with 2 hook clips 2 pincer clips 2 alligator clips 2 extension cables Warning Do not use the P5200A with scopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000
시리즈. The P5200A requires an oscilloscope or other measurement instruments with grounded inputs.Features and BenefitsBandwidth is DC to 50MHz Attenuation ratio is 1:50 and 1:500 Input impedance is 5Mohmll4pF Maximum common mode voltage is ±1.3KV Maximum Input voltage is 1000V CAT II Wide compensation range (7pF to 30pF) CMRR (typical) is 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB Overrange indicator Safety certified Switchable attenuation Switchable bandwidth limit Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)ApplicationsFloating measurements Switching power supply design Motor drive design Electronic ballast design CRT display design Power converter design and service Power device evaluation BNC interface (P5200A probes) TekVPI interface (TMDP and THDP
시리즈 probes) TekProbe interfaceCertificationsEN 61010-031 UL 61010-031 listed CAN/CSA-C22.2 IEC 61010-031 IP20 Rating CAT II