■ 제품필수정보
■ 제품사양
Probe
타입 = Differential Attenuation = 1:10, 1:100 Bandwidth = 25MHz Maximum Common Mode Input Voltage = 700V Connector
타입 = BNC Model Number p = N2791A
시리즈 = N Safety Category = CAT II 1000V Rise Time = 14ns Keysight Technologies Oscilloscope ProbeThe Keysight Technologies N2791A oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 700V of differential voltage and common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately. It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000
시리즈 (with version 5.26.0001 software), Infiniium 8000, 54830
시리즈 (with version 5.7 software) and Infiniium 9000
시리즈 (with version 2.0 software). Each of these scopes can support four N2790A probes. Supplied with alligator clips (2), hook clips (2), USB power cord 2m, 4 AA batteries, manual.Features and BenefitsBandwidth is DC to 25MHz (??dB) Attenuation ratio is 10:1/100:1 Input impedance is 4Mohm ll10pF each side to ground Differential range is (10:1) ±70V (DC + peak AC) Maximum differential is (100:1) ±700V (DC + peak AC) Common mode range is ±700V (100:1) (DC + peak AC) or 70V (10:1) Absolute maximum voltage is 1000VRMS CAT III (1/100 & 1/1000) Offset (typical) is ±7.5mV Source input impedance is 1Mohm BNC interface AC CMRR (typical) is -80dB at 50/60Hz and -40dB at 1MHz Compatible with any oscilloscope with 1 M??BNC input Ambient operating temperature ranges between -10°C and 50°C Power requirement 4xAA cellsCertificationsIEC61010-031 CAT II 1000 VAC
