■ 제품필수정보
■ 제품사양
Probe
타입 = Differential, High Voltage Attenuation = 1:50, 1:500 Bandwidth = 100MHz Maximum Common Mode Input Voltage = 1.4kV Connector
타입 = BNC Model Number p = N2790A
시리즈 = N Safety Category = CAT II 1000 V, CAT III 600V Rise Time = 3.5ns Keysight Technologies Oscilloscope ProbeThe Keysight Technologies oscilloscope probe offers conventional earth-grounded Keysight oscilloscopes to be used for floating signal measurements of up to 1400V of differential voltage and 1000V of common-mode voltage. It offers sufficient dynamic range and bandwidth for your application to make the floating measurements found in power electronics circuits safely and accurately. It also has an over-range indicator which alerts the user when the probe input exceeds the dynamic range of the probe. It is compatible with InfiniiVision 5000, 6000 (except 100MHz) and 7000
시리즈 (with version 5.26.0001 software), Infiniium 8000, 54830
시리즈 (with version 5.7 software) and Infiniium 9000
시리즈 (with version 2.0 software). Each of these scopes can support four N2790A probes. Supplied with browser tips (2), alligator plunger clips (2), pincer clips (2), coloured ID tags (2 off each of 4), DC offset adjustment tool, manualFeatures and BenefitsBandwidth is DC to 100MHz (??dB) Attenuation ratio is 50:1/500:1 Input impedance is 4Mohm ll7pF each side to ground Differential range is (50:1) 140±V (DC + peak AC) Maximum differential is (500:1) ±1400V (DC + peak AC) Common mode range is ±1000V (CAT II) or ±600V (CAT III) Absolute maximum voltage is±1500VDC Peak AC differential mode ±1300Vrms (CAT II) common mode Offset (typical) is adjustable Source input impedance is 1Mohm Autoprobe interface AC CMRR (typical) is -80dB at 50/60Hz and -50dB at 1MHz Ambient operating temperature ranges between -10°C and 50°C Power requirement 4xAA cellsCertificationsIEC61010-031 CAT II 1000V, CAT III 600V
