■ 제품필수정보

제조사	RS PRO
제조사품명	Q8P3CZZRYG24E
간략설명	RS PRO Panel Mount Indicator, 24V dc, 8mm Mounting Hole Size, Lead Wires Termination, IP67

■ 제품사양

Voltage Rating = 24V dc Mounting Hole Size = 8mm Lamp
타입 = LED Termination
타입 = Lead Wires IP Rating = IP67 Bezel Style = Prominent Bezel
색상 = Chrome
Current 등급 = 20mA Length = 22.5mm UL. RS Pro 8 mm LED Indicators IP67. From RS Pro, these LED ??s have been designed for panel mount applications and with an IP67 rating they are suitable for most environments including outdoor applications. They also have a wide operating temperature range of between -40 to +85 °C, further increasing the potential applications they may be used for. These 5 mm LED ??s require an 8 mm panel cut-out and are supplied with a fixing nut and spring washer. They come with bright chrome bezels and offer a selection of voltage ratings and bezel styles. All models are highly reliable and excellent quality. Features and Benefits. 8 mm panel mounting LED indicator 5 mm coloured diffused epoxy lens or 5 mm water clear super bright LEDs Bright chrome bezel Prominent, recessed and flush bezel styles 12 to 28 Vdc Wire terminations Sealed to IP67 Viewing angle: up to 100° Life expectancy: 100,000 hours Operating temperature range: -40 to +85 °C. What kind of protection do these indicators have?. Each LED Indicator is rated at IP67. Although not fully waterproof, it is fully protected from dust and other small particles. It can also be fully immersed in water (up to 1 m depth) for a maximum of 30 minutes. It would depend on the application as to how this feature would be used, but the LED would continue to operate smoothly if the above guidelines are followed correctly. Why choose LED?. Longevity and low power consumption are the main selling points of an LED. However, there are various other reasons to consider: Temperature - LED's give off a far cooler temperature than what an incandescent or neon light would. Direction - LED's will only emit light in a single direction, reducing the need for additional components, such as reflectors. Although this wouldn't apply if the LED indicator is being used as a circuit board signal. Cost - typically as LED's are in a larger supply than standard bulbs or pilot lights, they are a more cost effective solution to purchase, as well as run. These LED indicators should not be operated without a suitable series resistor or other current-limiting device. What are the uses of an Indicator?. Uses of indicators fall entirely down to the user. They can be fixed to PCB circuit boards and mounted on push buttons and switches. Primarily, these types of indicators are used within circuit boards and electronic designs. This is due to their relatively small size, as compared with other types of indicators, such as car turn signals. Are there fixings supplied with these indicators?. Absolutely, each LED indicator is fully supplied with a fixing nut, washer and a gasket. To ensure a quick and easy installation process.