■ 제품필수정보

제조사	Bourns
제조사품명	TBU-CA065-200-WH
간략설명	Bourns TBU-CA065-200-WH, Bi-Directional TVS Diode, 2-Pin DFN

■ 제품사양

Direction
타입 = Bi-Directional
최대 클램핑 전압 = 650V
장착형태 = Surface Mount
패키지 = DFN
최대 역 스탠드오프 전압 = 20V
핀수 = 2
최대 피크 펄스 전류 = 0.4A
칩당 요소 수 = 1
최소 작동 온도 = -55 °C
최대 작동 온도 = +125 °C Length = 6.5mm UL. Bourns TBU-CA
시리즈 TBU High Speed Protectors. Bourns Transient Blocking Unit (TBU) electronic current limiters (ECL) are circuit protection devices triggered by excessive voltage or current and designed as an optimal circuit protection solution for industrial controls, medical electronics, automated test systems, and military and aerospace applications. They are low capacitance, single bi-directional, high speed, resettable devices which protect - within rated limits - against faults caused by short circuits, AC power cross, induction and lightning surges. Special features include ultra-fast over current protection, in a wide range of trigger currents and voltages, and reduced form factors to save board space. The TBU can be used for protection on Ethernet, RS-485, HART and other ports where dangerous surge and power cross events may occur. It can also be used in telecom applications, providing a barrier to surges while allowing high frequency signals such as VDSL2 to pass through without damage to the circuit. For sensitive electronics applications the TBU eliminates the need for large shunt protection devices by stopping - in less than one microsecond - the damaging currents from reaching protected circuits. The TBU also offers significantly lower let-through energy and overshoot protection, which reduces stress on the PCB for increased reliability and product life. Bourns TBU protection technology limits the energy allowed into sensitive electronics without loading high data rate lines with capacitance. This enables designers to place high performance protection on even their highest bandwidth applications. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C to +125°C Storage temperature range -65°C to +150°C Maximum junction temperature +125°C ESD: IEC 61000-4-2