■ 제품필수정보

제조사	BEL POWER SOLUTIONS INC
제조사품명	BQ2320-9RG
간략설명	BEL POWER SOLUTIONS INC Q DC-DC Converter, ±12V dc/ 5A Output, 14.4 ??36 V dc Input, 120W, Rack Mount

■ 제품사양

Output Voltage = ±12V dc Input Voltage Range = 14.4 ??36 V dc Power Rating = 120W Input Voltage Nominal = 24 V dc Output Current = 5A
장착형태 = Rack Mount Isolated = Yes Number of Outputs = 2 Isolation Voltage = 4.2kV dc Depth = 20mm
시리즈 = Q Load Regulation = ±1% Minimum Temperature = -25°C Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q
시리즈. These Q
시리즈 compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws. 1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc Particularly suitable for rugged environment Excellent surge and transient protection Compliant with European railway standards EN 50155 and EN 50121-3-2 Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting Conformal coating provides very high levels of protection against humidity and conductive dust Hot plug and current share for redundant applications Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2 Features include wide trim range, output OK signal and inhibit
크기: H111 x W20 x L172 mm
무게: 480g Minimum isolation voltage: 4.2 kV. Regulation output 2. Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 = Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.