■ 제품필수정보

제조사	Molex
제조사품명	63811-1000
간략설명	Molex ServiceGrade Hand Crimping Tool for Open Barrel Terminal

■ 제품사양

시리즈 = ServiceGrade Crimp Connector
타입 = Open Barrel Terminal For Use With = 0.062in Pin and Socket Crimp Terminal Wire Size AWG = 24 ??14AWG Ratcheting = No Connector
타입 = Crimp Tool Molex ServiceGrade Hand Crimping Tool for Open Barrel Crimp Terminals. Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. ServiceGrade Hand Crimping Tool - Overview. From Molex a low cost ServiceGrade manual crimping tool with a sturdy construction tested to a minimum of 1000 cycles. This crimping tool consists of two ergonomically designed, anti-slip, soft grip handles with a small handle spread making the tool comfortable to use. The crimping jaws contain a range of conductor and insulation profiles and can accommodate a range of material thicknesses and conductor barrel lengths making this crimp tool a versatile solution for a wide range of crimping requirements. Key Features and Benefits. Service life of 1000 cycles Easy to use Ergonomically designed handles with small handle spread for comfortable use Accepts a wide range of material thicknesses and barrel lengths. Applications. This ServiceGrade hand crimping tool is ideal for use in low volume field repairs and prototyping and is commonly used by electrical contractors and technicians. Questions and Answers. What Terminals can these Crimping Tools be used with? This ServiceGrade hand crimping is for use with Molex open barrel crimp terminals with a wire size range from 24 AWG to 14 AWG The crimping jaws accept material thicknesses from 0.15 mm to 0.40 mm and conductor barrel lengths from 2 mm to 3.5 mm