■ 제품필수정보

제조사	Telemecanique Sensors
제조사품명	XUB4APANL2
간략설명	Telemecanique Sensors Diffuse Photoelectric Sensor, Barrel Sensor, 100 mm Detection Range

■ 제품사양

Sensor Style = Barrel Detection
타입 = Diffuse Detection Range = 0.1 m Output
타입 = PNP Electrical Connection = 2/5-Wire Cable 2m Maximum DC Voltage = 24V Light Source = Infrared IP Rating = IP65, IP67 Maximum Current = 100 mA Response Time = <1 ms
시리즈 = XUB M18 cylindrical photoelectric sensors. The OsiSense XU general purpose photo-electric sensor from Schneider is available in single mode or multi-mode versions in the following formats: Reflex (XUB 1); Thru-beam (XUB 2); Diffuse (XUB 4); Diffuse with adjustable sensitivity (XUB 5); Polarised reflex (XUB 9). M18 cylindrical photoelectric sensors in plastic or metal housing Short-circuit protection and LED status indicator Single or multi-mode function 2m cable or M12 connector (4 pin) output. How do they work and where can I use them?. ;ul> ;li>An OsiSense Photoelectric has a light beam transmitter (light-emitting diode, LED) and a light-sensitive receiver (photo-transistor). A light-emitting diode is an electronic semi-conductor component emitting light when electric current flows through it. The light can be visible or invisible, depending on the transmission wavelength. ;/li> ;/ul>. ;ul> ;li>An object is detected when it enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver. ;/li> ;/ul>. ;ul> ;li>Depending on the model and application requirements, the transmission beam is either non-visible infrared or ultraviolet (for detection of luminescent materials). It may also be a visible red or green (for colour mark reading etc.) and laser red (for long sensing distance and short focal length). ;/li> ;/ul>. ;ul> ;li>The advantage of LEDs is their very fast response. To render the system insensitive to ambient light, the current flowing through the LED is modulated to produce a pulsed light transmission. Only the pulsed signal will be used by the photo-transistor and processed to control the load. ;/li> ;/ul>. Photelectric Sensor Systems Available. Through-Beam or Multimode (set in through-beam mode). ;ul> ;li>Longer sensing distance ??(up to 100 m ??XUBL line). ;/li> ;li>Precise detection with high repeat accuracy. ;/li> ;li>Not affected by colour or position angle. ;/li> ;li>Good resistance to difficult environments ??example- dust, dirt. ;/li> ;li>When using several sensors ensure the sensors do not disrupt each other. ;/li> ;/ul>. Polarised Reflex system or Multimode (with reflector accessory). ;ul> ;li>Medium sensing distance ??(up to 15 m). ;/li> ;li>Precise detection. ;/li> ;li>Only one unit wired. ;/li> ;li>No effect on detection by colour or position angle. ;/li> ;li>Visible Red beam transmission. ;/li> ;li>When using several sensors ensure the sensors do not disrupt each other. ;/li> ;/ul>. Multimode sensor (with reflector accessory). ;ul> ;li>Easy alignment. 3 LEDs providing set-up assistance.Anti-interferance function (2 sensors can be used with no alignment precautions). Semi-transparent objects detected by using teach mode function. ;/li> ;/ul>. Diffuse System or Multimode. ;ul> ;li>Short sensing distance. Only one unit to be wired. ;/li> ;li>Easy to use. Fast response. Low cost. ;/li> ;li>Sensitive to background colours and the working environment (dirt, dust). ;/li> ;li>When using several sensors ensure the sensors do not disrupt each other. ;/li> ;/ul>. Optical Forks. ;ul> ;li>Made from metal a strong and sturdy sensor suitable for packaging and conveying applications with label detection. No alignment needed in through-beam mode. ;/li> ;li>Only one connection needed. LEDs. Adjustable or fixed. Detect small parts ??minimum size detected to 0.05 mm. ;/li> ;li>High switching frequency from 4 kHz to 25 kHz. ??excellent for higher operating rates. ;/li> ;/ul>