■ 제품필수정보
■ 제품사양
Equipment
타입 = Cable Tester Connector
타입 = BNC, RJ45 Tone = Yes Power Source = Battery Battery
타입 = 9V Battery Life = 20 h
무게 = 1.3kg
높이 = 38mm Length = 130mm
최대 작동 온도 = +40°C
최소 작동 온도 = 0°C Model Number p = LAN-1 Each unit is equipped with 3 RJ45/BNC adapter cables, a male/female BNC connector, 9 V battery and user manual. LAN-1 LAN cable tester. Amprobe LAN-1 Cable Tester is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test. Features and Benefits:. Loopback test or remote test Buzzer sound for errors in the cable 300m maximum line length Approx. 20 hour battery life 2 sets of LED, signal and test. Frequently asked questions:. Tests pin configuration for 10/100 base ??T, 10 base-2, RJ45 modular, AT ;T 258A, EIA / TIA 568A/568B cables and Token Ring cables Checks for continuity, interruptions, short circuits or incorrect connections Tests installed cables or the patch panels by using the remote termination module Performs loopback or remote tests Buzzer sound warning for error condition Two sets of LED lights for signal and test indication Maximum cable length: >300 metres Connectors: RJ45, BNC. What is a LAN cable tester?. LAN testers are devices that allow a user to verify and test a connection or signal within a data cable. The types of tests include whether the cable is set up correctly, connected, the strength or speed of the signal being sent through the cable. How do network cable testers work?. Usually made up of 2 sections or 2 boxes, a network cable tester will have a receiver and a transmitter. A cable is then connected directly or with connectors to both for testing. Once the tester is switched on a signal or data is sent via the cable and a report or the results are shown on the receiver. Receivers comes in a variety of types, shapes and sizes and therefore the results may vary in the way they are displayed. Some have LED's, some show patterns in lights and some different colours. The tester instruction manual will show what the results mean but some testers help determine the connection speed and detect problems. What is the difference between RJ45 ; RJ11?. RJ45 is an 8-pin connector whereas RJ11 is only a 4 wire connector. RJ45 is used in Ethernet connections to connect computers to networks. RJ11 is more of a conventional telephone wire used to bring fibre into your house. RJ is the abbreviation of ??registered jack ??
