■ 제품필수정보

제조사	Fluke
제조사품명	FLUKE-718 1G
간략설명	Fluke -68.9mbar to 68.9mbar 718 Pressure Calibrator

■ 제품사양

Maximum Pressure Measurement = 68.9mbar Minimum Pressure Measurement = -68.9mbar Resolution = 0.001 mbar Model Number p = 718 Current Loop Measurement = Yes
최대 작동 온도 = +55°C
최소 작동 온도 = -10°C
무게 = 992g
크기 = 216 x 94 x 66mm
높이 = 66mm Length = 216mm Width = 94mm CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V. Fluke 718, holster, TL75 test leads, AC72 crocodile clips, two 9 V batteries, instruction manual. Fluke 718 Pressure Calibrators. The complete solution to pressure calibration. The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field. Features and Benefits. Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field Error % calculation for quicker pass/fail decision making in the field Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage Min/Max/Hold to capture changing measurements Switch test feature for quicker and more accurate pressure switch testing 30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa). For measuring overpressure and vacuum with an internal sensor Suitable for non-corrosive gases Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump) Select from numerous technical units for the pressure Simultaneous measurement of pressure and current for simple P/I or I/P testing 24 V loop supply Zero and damp functions Test functions for push button switch: set, reset, dead zone. New 1 and 300 PSI pressure ranges mean fewer extra tools required 1, 30, 100 ; 300 PSI ranges now available